ada-plan-view-accessibility

Use this skill for plan-view accessibility checks. It is not a full legal ADA compliance review; apply only the geometric rules provided by the task.

Plan-View Checks

• Door clear opening: compare the submitted clear width against the minimum in the rules file, commonly 32 inches.
• Door swing: if the rule disallows swing into required fixture clearance, prefer an outward or sliding swing in the repaired layout. Do not leave an inward repaired swing unless you have explicitly modeled and cleared the swing path against fixtures and required clearances.
• Turning space: verify that a 60 inch diameter circle fits inside usable floor area. Diameter alone is not enough. Apply the wall/boundary offset from the rules, subtract protected or blocked fixtures such as tubs, and allow overlap with toilet clear floor space only when the rules say so.
• Lavatory overlap: allow the turning circle to overlap a lavatory only when plan-view knee/toe clearance is explicitly indicated and meets the required width and depth.
• Toilet centerline: measure from the adjacent side wall and keep it inside the rule range, commonly 16 to 18 inches.